Budget Buildings Stables
Pack of Five Stable Yard Buildings
** FREE P&P **
* Georgian, Victorian, WWI, WWII or Modern Day
* Any layout
* For gamers who like to game
* Completely modular
* Easy stack and rotate
* Access to all floors
* Compatible with all Budget Buildings
Five 28mm Flexible Stable Yard Buildings for Gamers, Wargamers, Warhammer and More
2 x Stables, with internal barriers. Put side by side to move between them, or rotate so shutters are open to outside - different tactical possibilities
2 x Cartsheds, enclosed on three sides, plenty of cover unless you are flanked
1 x Archway, makes a great feature entrance into an enclosed area, or just another route for figures to move.
Each building has it's own roof and is supplied to make single storey buildings. You can still stack these, or add modules from any other set to make two storeys, towers and more. Or use these as a ground floor set. The cartsheds and stables could also make verandahs on ground or upper storeys.
Swap ground floor, upper stories and roofs to make the buildings you need quickly and easily.
Large buildings fit with the smaller buildings perfectly.
This pack includes 10 modules in all, 5 buildings each with a roof.
Enough to make a decent stable yard or courtyard, or use them as separate buildings in a farm or village setting.
Will add to a grand complex or slide it up next to a pub or inn.
Fully compatible with all our other building sets.
Suitable for 28mm Figures
The buildings are loosely scaled as heroic 28mm or 1/48th to 1/56th - but will fit any typical mini from 1inch to 1.5inches - 25mm to 36mm.
The buildings are based on a 4 inch (10 cm) square, so depending on your scale work out around 12 to 20 feet across.
Where figures are shown in the images these are either from Zombicide, Warhammer or Star Wars.
Each floor is around 2.5 inches (6.5 cm) tall. The height does vary depending on the building style.
Doorways are oversized to allow figures to move through doors and windows.
Buildings are for gaming rather than realistic dioramas.
Maximum flexibility: stack,swap,rotate.
The rooms are designed for maximum gaming flexibility, rooms will have 1, 2 or 3 doors and 1 or more windows and blank walls.
You don't have to face the doors to the front of course.
Upper floors have optional openings into the floor below.
Roof modules do not have a figure space, you can use the half height room extension to create a useable roof space.
Easy to make, easy to paint
Each module is made from 3mm MDF, easy to snap together with what I like to call "squeaky fit".
The laser cut is so precise you should just be able to squeak the components into position. It takes less than a minute to make one module.
For accessories like windows and doors you can use any glue - I recommend a Pritt stick or any paper glue stick - there is no mess with these.
MDF is of course ever so easy to paint. If you just want a quick finish you can spray paint in seconds. I recommend punching the pieces out, spray paint, then assemble.
If you want to hand paint details on afterwards then the sky is the limit
Budget Buildings 3 French Cottage/Buildings
Budget Buildings 3 Cotswold/Rural/Medieval Buildings
Budget Buildings Barns and Fences
Our Other Websites
uLearn.Photography - online photography courses
JustCopyAndPost.com - prewritten blogs and emails
Simon Q. Walden, AQSgames.com
Rose Cottage, Church Rd