Budget Buildings Church
Complete Church with Tower
** FREE P&P **
A 12 inch long, 14 inch high church to add to the modular building set.
This is equivalent to 3 normal modules in length and is fully compatible with other modules if you want to make a temple or other less conventional building.
Jail, Temple, Meeting Hall, Castle or Manor House - lots of possibilities beyond just a church.
Stack on a couple of extra modules for our other sets and you've got a completely different building.
28mm Flexible Buildings for Gamers, Wargamers, Warhammer and More
Play with the steeple - or if you want the roof top to be accessible for fighting from - makes a great tower bastion - then just remove the steeple tower.
Make it single or two-story.
You don't have to use the tower at all. You could just have the ground floor with roof and flat roof.
Or, you could you have the two tower modules under the sloped roof with a flat roof at the end.
You can add modules from our other sets, or you can use the modules in the other sets.
Suitable for 28mm Figures
The buildings are loosely scaled as heroic 28mm or 1/48th to 1/56th - but will fit any typical mini from 1inch to 1.5inches - 25mm to 36mm.
The buildings are based on a 4 inch (10 cm) square, so depending on your scale work out around 12 to 20 feet across.
Where figures are shown in the images these are either from Zombicide, Warhammer or Star Wars.
Each floor is around 3 inches (8 cm) tall. The height does vary depending on the building style.
Doorways are oversized to allow figures to move through doors and windows.
Buildings are for gaming rather than realistic dioramas.
Maximum flexibility: stack,swap,rotate.
The rooms are designed for maximum gaming flexibility, rooms will have 1, 2 or 3 doors and 1 or more windows and blank walls.
You don't have to face the doors to the front of course.
Upper floors have optional openings into the floor below.
Roof modules do not have a figure space, you can use the half height room extension to create a useable roof space.
Easy to make, easy to paint
Each module is made from 3mm MDF, easy to snap together with what I like to call "squeaky fit".
The laser cut is so precise you should just be able to squeak the components into position. It takes less than a minute to make one module.
For accessories like windows and doors you can use any glue - I recommend a Pritt stick or any paper glue stick - there is no mess with these.
MDF is of course ever so easy to paint. If you just want a quick finish you can spray paint in seconds. I recommend punching the pieces out, spray paint, then assemble.
If you want to hand paint details on afterwards then the sky is the limit
Our Other Websites
uLearn.Photography - online photography courses
JustCopyAndPost.com - prewritten blogs and emails
Simon Q. Walden, AQSgames.com
5 Home Farm