* Georgian, Victorian,  WWI, WWII or Modern Day

* Cost-effective

* Any layout

* For gamers who like to game

* Compatible with all Budget Buildings

 

 

The straight segments are 4 inches (10 cm) long.  There are 8 of these.

 

The corner segments are about 2 inches (5cm).  There are 8 of these.

 

There are two pairs of gates and four gate posts.  These can be fitted at any time to either a straight or corner section.   The gates lift out if you just want the posts - or need to blow the gates down!

 

Enough to make a decent wall around most buildings, or buy two sets and surround a whole village!

 

Fully compatible in size with all our other building sets.

 

The walls are loosely scaled as 1/48th to 1/56th - but will fit any typical mini from 1inch to 1.5inches - 25mm to 36mm.

 

The walls are based on a 4inch/10cm square, so depending on your scale work out around 12 to 20 feet across.

 

The actual height of the wall is 45mm.

 

Where figures are shown in the images these are either from Zombicide, Warhammer or Star Wars.

 

 

 

Each module is made from 3mm MDF, easy to snap together with what I like to call "squeaky fit".

 

The laser cut is so precise you should just be able to squeak the components into position.  It takes less than a minute to make one module.

  

MDF is of course ever so easy to paint.  If you just want a quick finish you can spray paint in seconds.   I recommend punching the pieces out, spray paint, then assemble.

 

If you want to hand paint details on afterwards then the sky is the limit